产品中心
产品知识 当前位置:首页>产品知识>产品知识

如何让接地电阻柜能达到预期效果

网址:www.jiedixiang58.com  2020-07-27  作者:admin    阅读:

接地电阻柜使用前的检查工作有哪些要想对于接地电阻柜的使用能够顺利进行,并且达到我们所预想的效果,在对其正式投入使用之前,都需要进行一定的检查工作,为了更好的促进用户对其了解,相关技术人员对其现骨干检查内容介绍如下:
What are the inspection work before using the grounding resistance cabinet? In order to smoothly carry out the use of the grounding resistance cabinet and achieve the desired effect, we need to carry out certain inspection work before putting it into use. In order to better promote the user's understanding of the grounding resistance cabinet, the relevant technical personnel introduce the main inspection contents as follows:
据介绍可以了解到,一般情况下我们在使用前,要先检查一下接地电阻柜有无损坏、端帽是否松动以及引线是否生锈等现象。然后我们还用用万用表来检查一下它的阴值是否与标称阻值相符。另外需要特别注意到的一点是,对于外形小的接地电阻柜来说,我们可以将它放到桌子上,用表笔直接测量。要记住不要选用与标值不符的接地电阻柜。只有在我们对其使用前做好充分的检查工作后,才能够对其使用顺利进行,从而满足广大用户的需求。
According to the introduction, we can learn that in general, before using, we should first check whether the grounding resistance cabinet is damaged, whether the end cap is loose, and whether the lead wire is rusty. Then we use a multimeter to check whether its negative value is consistent with the nominal resistance value. In addition, we should pay special attention to the small grounding resistance cabinet. We can put it on the table and measure it directly with a probe. Remember not to use the grounding resistance cabinet that does not conform to the marked value. Only after we do a good job of checking before using it, can we use it smoothly, so as to meet the needs of the majority of users.

返回新闻

电话
15003226909